Waveshare – chapeau SIM7070G nb-iot/cat-m/GPRS/GNSS pour Raspberry Pi, support de bande global

Category : Composants et fournitures électroniques | Composants actifs

USD 36.35

Waveshare – chapeau SIM7070G nb-iot/cat-m/GPRS/GNSS pour Raspberry Pi, support de bande global

Description
Specification

Description

DESCRIPTION

Prohibited by the module manufacturer SIMCOM, we're not allowed to ship this product, or to provide any tech support, to the following countries/regions: Iran, North Korea, Cuba, Sudan, Syrian.

SIM7070G NB-IoT / Cat-M / GPRS HAT For Raspberry Pi, Global Band Support, With GNSS Positioning

NB-IOT / CAT-M / GPRS / GNSS HAT

Low Power Narrow Band Cellular IoT Communication Module For Raspberry Pi

Based on SIM7070G, Global Band Support

This is a telecommunication HAT for Raspberry Pi which supports global bands of NB-IoT, Cat-M, and GPRS, as well as GNSS positioning function. Due to its advantages like small size, low delay, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on.

Compared to SIM7080G, this module also supports GPRS (2G); compared to SIM7000C/E, it is more generic due to the global bands support.

Features At A Glance

Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
Supports communication protocols such as TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT
Supports GNSS positioning (GPS, BeiDou, GLONASS, Galileo)
Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
Breakout UART control pins, to connect with host boards like Arduino/STM32
SIM card slot, supports ONLY 1.8V SIM card (3V SIM card is not available)
2x LED indicators, easy to monitor the working status
Baudrate: 300~3686400 bps
Common baudrate auto-negotiation: 9600/19200/38400/57600/115200 bps
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)

Specifications

NB-IOT/CAT-M/2GGNSSOTHER

Band	NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85
	Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85
	GSM/GPRS/EDGE: 850/900/1800/1900MHz
Data rate	NB-IoT: 136Kbps(DL)/150Kbps(UL)
	Cat-M: 589Kbps(DL)/1119Kbps(UL)
	GPRS: 85.6Kbps(DL)/85.6Kbps(UL)
	EDGE: 236.8Kbps(DL)/236.8Kbps(UL)
SIM card support	NB-IoT/Cat-M/2G card (1.8V SIM card ONLY)
Applicable region	global
Receiver type	16-channel
Receiver type	C/A Code
Band	GPS L1: 1575.42 ± 1.023MHz
	GLONASS L1: 1598.0625 ~ 1605.375MHz
	BDS B1: 1559.052 ~ 1591.788MHz
	Galileo L1: 1575.42 ± 1.023MHz
Data format	NMEA-0183
Antenna	Active antenna
Power supply	5V
Operating voltage	5V / 3.3V (configured via 0Ω resistor)
Current consumption	about 41mA (idle mode)
Operating temperature	-40°C ~ 85°C
Storage temperature	-45°C ~ 90°C
Dimensions	30.50mm × 65.00mm

Standard Raspberry Pi 40PIN GPIO

Compatible With Raspberry Pi Series Boards

Global Band Support Of NB-IoT/Cat-M/2G

NB-IoT: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66/B71/B85 Cat-M: B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B66/B85 GSM/GPRS/EDGE: 850/900/1800/1900MHz

Cloud Communication

Supports Communication Protocols Including TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT

GNSS Positioning

Supports GPS, BeiDou, GLONASS, Galileo Positioning

What's On Board

SIM7070G
MP1482 power chip
RT9193-33 power chip
Raspberry Pi GPIO header for connecting with Raspberry Pi
USB interface for testing AT Commands, getting GPS positioning data, etc.
SIM7070G control interface for connecting with host boards like Arduino/STM32
SIM card slot supports 1.8V SIM card ONLY
GNSS antenna connector
LTE antenna connector

Module power key
Network status indicator
Power indicator
Operating voltage selection A: set IO level as 5V B: set IO level as 3.3V (default)
DTR selection A: DTR is connected to P26 B: DTR is disconnected (default)
PWR selection A: PWR is connected to P4 (default) B: PWR is connected to power supply

Pinout Definition

Outline Dimensions

Resources & Services

WIKI: www.waveshare.com/wiki/SIM7070G_Cat-M/NB-IoT/GPRS_HAT

* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.

Selection Guide

CAT-M & NB-IOT & GSMCAT-M & NB-IOTNB-IOT SIM7000CSIM7000ESIM7070GSIM7080GSIM7020CSIM7020E

Applicable regions	China	Europe / Africa / Australia / Southeast Asia	Global		China	Europe / Africa / Australia / Southeast Asia
Band
NB-IoT	LTE-FDD: B1/B3/B5/B8	LTE-FDD: B3/B8/B20/B28	B1/B2/B3/B4/B5/B8/B12/B13/B18/B19 /B20/B25/B26/B28/B66/B71/B85		LTE-FDD: B1/B3/B5/B8	LTE-FDD: B1/B3/B5/B8/B20/B28
Cat-M			B1/B2/B3/B4/B5/B8/B12/B13/B14/B18 /B19/B20/B25/B26/B27/B28/B66/B85		N/A
GSM	GPRS/EDGE 900/1800 MHz		GSM/GPRS/EDGE 850/900/1800/1900MHz	N/A	N/A
GNSS	GPS, GLONASS, BeiDou, Galileo				N/A
Data Rate
NB-IoT(Kbps)	34(DL)/66(UL)		136(DL)/150(UL)	136(DL)/150(UL)	26.15(DL)/62.5(UL)
Cat-M(Kbps)	300(DL)/375(UL)		589(DL)/1119(UL)	589(DL)/1119(UL)
EDGE(Kbps)	236.8(DL)/236.8(UL)		236.8(DL)/236.8(UL)
GPRS(Kbps)	85.6(DL)/85.6(UL)		85.6(DL)/85.6(UL)
Software Features
Network protocol	TCP/UDP/HTTP/HTTPS/TLS/DTLS/PING/LWM2M/COAP/MQTT, etc.
Firmware upgrade	USB				UART
Hardware Interfaces
SIM card slot	1.8V/3.3V		1.8V	1.8V	1.8V/3.3V
UART	Supports AT commands				Supports AT commands, firmware upgrading
USB	Supports AT commands testing, GPS positioning, firmware upgrading, etc.				For external power supply ONLY
Antenna connector	LTE antenna (SMA) + GNSS antenna (IPEX)			LTE antenna (IPEX) + GNSS antenna (IPEX)	LTE antenna (SMA)
Applications
Examples	Meters, remote control, smart home, smart city, intelligent agriculture, and so on